014-1066-030 - Follower plate for pumps with shank 30 mm subgroup-Lift vetpomp installaties een volgplaat met doorsnede van

een volgplaat met doorsnede van 370 mm en een vul pistool

Because of the depression created by the pump

These pumps are advised for the transfer of low-high viscosity of and similar for medium-long distances

Those are suitable for central supply of plants where a major quantity of grease and a major pressure at long and short distance are required

014-1066-030 - Follower plate for pumps with shank 30 mm subgroup-Lift vetpomp installaties een volgplaat met doorsnede vanIt is advisable to use always the follower plate. it is very important of ambient temperature is low and when high viscosity grease is used. Because of the depression created by the pump. the plate is attracted towards the bottom of the drum by atmospheric pressure. It pushing the grease into the pump and avoids air cavities. Also it removes the grease remaining on the walls down to the bottom of the drums.